Descripción del producto
Polyalphaolefin (PAO) API Group IV Synthetic Base Oil, 6 cSt. KATMOTO PAO 6 is a 6 cSt polyalphaolefin (PAO) API Group IV synthetic base oil for full-synthetic engine oils, gear oils, compressor oils and greases.
Principales prestaciones
| Excellent low-temperature fluidity
very low pour point (-60°C) for outstanding cold-flow. |
High oxidation stability
fully synthetic PAO chemistry resists oxidation and deposits. |
| High viscosity index
high VI for stable viscosity across wide temperatures. |
Low volatility
low Noack volatility for reduced oil consumption. |
| Sulfur/nitrogen-free
clean Group IV stock for low-SAPS and high-performance oils. |
Higher-viscosity grade
6 cSt grade for engine, gear and compressor synthetic blends. |
Aplicaciones y nivel de rendimiento
| Aplicaciones | Blending of full-synthetic engine oils, gear oils, compressor oils and greases requiring a 6 cSt Group IV PAO base stock with high VI and excellent low-temperature and oxidation performance. |
| Especificaciones | API Group IV (PAO) — fully synthetic polyalphaolefin base stock. Excellent low-temp fluidity — very low pour point for severe cold service. High VI / low Noack — stable viscosity and low volatility. Sulfur/nitrogen-free — for premium low-SAPS formulations. Full-synthetic blending — for engine, gear and compressor oils. |
| Idoneidad para fabricantes de equipos originales (OEM) | Supplied as a blending base stock for lubricant formulators. Typical for full-synthetic engine oils, synthetic gear and compressor oils. |
| Aviso importante | These are raw blending stocks supplied to formulators. Typical values are for guidance; confirm against the certificate of analysis (COA) for each batch. |
| Propiedad | Método de ensayo | Objetivo Valor típico |
| Aspecto / Color | Saybolt / ASTM D1500 | Water-white |
| Grupo de aceites base | API 1509 | API Group IV (PAO) |
| Viscosidad cinemática a 100°C | ASTM D445 | 5.9 mm²/s |
| Viscosidad cinemática a 40°C | ASTM D445 | 31.0 mm²/s |
| Índice de viscosidad | ASTM D2270 | 138 |
| Punto de inflamación, COC | ASTM D92 | 235°C |
| Punto de vertido | ASTM D97 | -60°C |
| Noack Volatility | ASTM D5800 | 7 % mass |
| Densidad a 15°C | ASTM D4052 | 0.827 g/cm³ |
| Sulfur Content | ASTM D5453 | Nil |
Nota: Los valores objetivo indicados anteriormente son valores típicos del producto y se ofrecen únicamente a título informativo; los datos definitivos de producción están sujetos a la ficha técnica oficial de KATMOTO (TDS) y al informe de ensayos de laboratorio.