Ester Fully Synthetic Hybrid & Fuel Economy Engine Oil
| Product Name | K9 ECO 0W-20 | Specification | 0W-20 |
| Product Type | Ester Fully Synthetic Engine Oil | Performance Level | API SQ/SP, ILSAC GF-7A |
| Series / Category | Hybrid Engine Oil | Application | Hybrid / Japanese & Korean New Vehicles |
Product Description
KATMOTO K9 ECO 0W-20 is an ester fully synthetic fuel-economy engine oil developed for hybrid vehicles and new-generation gasoline engines requiring SAE 0W-20 API SQ/SP and ILSAC GF-7A performance. The balanced low-viscosity formulation supports fuel economy, fast cold-start lubrication, LSPI protection, timing chain wear control and long-lasting engine cleanliness in frequent start-stop urban driving.
Key Performance Features
| ILSAC GF-7A fuel economy and modern engine protection. | Hybrid start-stop protection for frequent urban driving. |
| Fast cold-start flow helps reduce start-up wear. | LSPI and timing chain wear control for TGDI engines. |
| Ester-enhanced lubricity for smooth and efficient operation. | Clean engine performance with sludge and deposit control. |
Applications & Performance Level
| Applications | Hybrid vehicles, fuel-economy gasoline engines and new-generation passenger cars requiring SAE 0W-20 API SQ/SP ILSAC GF-7A engine oil. |
| Suitable For | Toyota, Honda, BYD and other hybrid/gasoline passenger cars where 0W-20 API SQ/SP or ILSAC GF-7A oil is specified. |
| Important Notice | Use only where SAE 0W-20 is recommended. Not intended for engines requiring 0W-8, 0W-16, 5W-30, ACEA C3, diesel CK-4 or OEM-specific high-HTHS oils. |
| Property | Test Method | Target Typical Value |
| Appearance / Color | Visual | Clear amber liquid |
| SAE Viscosity Grade | SAE J300 | 0W-20 |
| Density @ 15°C | ASTM D4052 | 0.850 g/cm³ |
| Kinematic Viscosity @ 40°C | ASTM D445 | 44.8 mm²/s |
| Kinematic Viscosity @ 100°C | ASTM D445 | 8.5 mm²/s |
| Viscosity Index | ASTM D2270 | 172 |
| CCS Viscosity @ -35°C | ASTM D5293 | 5,300 mPa·s |
| MRV Viscosity @ -40°C | ASTM D4684 | 17,500 mPa·s |
| HTHS Viscosity @ 150°C | ASTM D4683 | 2.65 mPa·s |
| Pour Point | ASTM D97 | -45°C |
| Flash Point, COC | ASTM D92 | 224°C |
| Noack Evaporation Loss | ASTM D5800 | 9.5 % mass |
| Total Base Number (TBN) | ASTM D2896 | 7.8 mg KOH/g |
| Sulfated Ash | ASTM D874 | 0.78 % mass |
| Phosphorus | ASTM D5185 | 0.075 % mass |
