Ester Fully Synthetic Hybrid & Fuel Economy Engine Oil
| Product Name | KATMOTO K9 ECO | SAE Grade | 0W-20 |
| Product Type | Ester Fully Synthetic Engine Oil | Performance Level | API SQ/SP, ILSAC GF-7A |
| Series Positioning | K9 – Hybrid & Fuel Economy | Application | Hybrid / Japanese-Korean New Cars / City Driving |
Product Description
KATMOTO K9 ECO 0W-20 is an ester-enhanced full synthetic fuel economy engine oil for hybrid vehicles and modern gasoline passenger cars requiring SAE 0W-20. It combines low-friction performance with robust LSPI protection, timing-chain wear control, clean piston performance and fast cold-start lubrication for city driving and daily commuting.
Key Performance Features
| GF-7A fuel economy performance
supports current mainstream passenger-car gasoline oil requirements. |
Hybrid and start-stop ready
stable lubrication during frequent restart and low-temperature operation. |
| LSPI protection
designed for modern GDI/TGDI engines under low-speed/high-load conditions. |
Timing-chain wear control
helps maintain chain durability throughout the drain interval. |
| Clean piston and sludge control
supports long-lasting engine cleanliness and oxidation resistance. |
Cold-start protection
strong low-temperature flow for rapid oil pressure and reduced start-up wear. |
Applications & Performance Level
| Applications | Hybrid vehicles, Japanese/Chinese/Korean new-generation gasoline passenger cars and fuel-economy city vehicles requiring SAE 0W-20. Suitable for many Toyota, Honda, Nissan, Mazda, Hyundai and Kia applications. |
| Meets / Suitable For | API SQ / Resource Conserving; API SP / Resource Conserving; ILSAC GF-7A; backward-compatible direction for ILSAC GF-6A / GF-5 and API SN PLUS / SN where SAE 0W-20 is recommended. |
| Important Notice | Use the viscosity and specification recommended by the vehicle manufacturer. Do not use in engines requiring 0W-16, 0W-8 or European high-HTHS specifications unless approved. |
| Property | Test Method | Target Typical Value |
| Appearance / Color | Visual | Clear green liquid |
| SAE Viscosity Grade | SAE J300 | 0W-20 |
| Density @ 15°C | ASTM D4052 | 0.844 g/cm³ |
| Kinematic Viscosity @ 40°C | ASTM D445 | 44.0 mm²/s |
| Kinematic Viscosity @ 100°C | ASTM D445 | 8.50 mm²/s |
| Viscosity Index | ASTM D2270 | 174 |
| CCS Viscosity @ -35°C | ASTM D5293 | 5,400 mPa·s |
| MRV Viscosity @ -40°C | ASTM D4684 | 11,500 mPa·s |
| HTHS Viscosity @ 150°C | ASTM D4683 / D4741 | 2.70 mPa·s |
| Pour Point | ASTM D97 | -48°C |
| Flash Point, COC | ASTM D92 | 226°C |
| Noack Evaporation Loss | ASTM D5800 | 9.5 % mass |
| Total Base Number (TBN) | ASTM D2896 | 8.0 mg KOH/g |
| Sulfated Ash | ASTM D874 | 0.75 % mass |
