Líquido para transmisiones híbridas e-CVT de baja viscosidad
| Nombre del producto | LÍQUIDO PARA LA TRANSMISIÓN e-CVT HÍBRIDA | Especificaciones | Especificaciones del e-CVT |
| Tipo de producto | Líquido para transmisiones híbridas e-CVT / transaxles eléctricos | Nivel de rendimiento | Híbrido de tipo e-CVT |
| Serie / Categoría | Líquido de transmisión híbrida | Aplicación | Toyota Hybrid / Honda e:HEV / Nissan e-POWER |
Descripción del producto
KATMOTO HYBRID e-CVT FLUID is a low-viscosity transmission fluid developed for selected hybrid electric transaxles and e-CVT systems. It supports smooth power transfer, anti-shudder performance, energy efficiency, copper-component protection and stable lubrication for hybrid drive units integrating gears, bearings, electric motors and hydraulic control components.
Principales prestaciones
| Low-viscosity design supports hybrid energy efficiency. | Smooth e-CVT power transfer and anti-shudder performance. |
| Protects gears, bearings and copper-containing electric drive components. | Excellent low-temperature fluidity for hybrid start-stop operation. |
| Oxidation and foam control for stable drive-unit performance. | Designed for selected Japanese hybrid electric transaxle systems. |
Aplicaciones y nivel de rendimiento
| Aplicaciones | Selected hybrid electric transaxles and e-CVT systems in Toyota Hybrid, Honda e:HEV, Nissan e-POWER and similar hybrid vehicles where compatible e-CVT/low-viscosity ATF-type fluid is specified. |
| Adecuado para | Toyota WS-type hybrid transaxle applications, Honda e:HEV-type and Nissan e-POWER-type applications where fluid compatibility is confirmed. |
| Aviso importante | Hybrid e-CVT systems use different fluid requirements by model. Do not use as a universal CVT, DCT, DHT or conventional AT fluid unless the service manual confirms compatibility. |
| Propiedad | Método de ensayo | Objetivo Valor típico |
| Aspecto / Color | Visual | Rojo |
| Densidad a 15°C | ASTM D4052 | 0,846 g/cm³ |
| Viscosidad cinemática a 40°C | ASTM D445 | 27.5 mm²/s |
| Viscosidad cinemática a 100°C | ASTM D445 | 5.8 mm²/s |
| Índice de viscosidad | ASTM D2270 | 160 |
| Viscosidad de Brookfield a -40 °C | ASTM D2983 | 10,000 mPa·s |
| Punto de vertido | ASTM D97 | -48 °C |
| Punto de inflamación, COC | ASTM D92 | 220 °C |
| Corrosión del cobre | ASTM D130 | 1b |
| Tendencia a la formación de espuma / Estabilidad | ASTM D892 | 0/0 ml |
Note: These are balanced formulation target values prepared with reference to market-leading products of similar specification and application. Unless separately stated, listed performance levels are suitability references rather than official OEM approvals. Final production values should be confirmed by official KATMOTO TDS and laboratory test report.
