Product Description
Lithium Complex Extreme-Pressure Multi-Purpose Grease. KATMOTO GREASE LC EP2 is a lithium-complex extreme-pressure multi-purpose grease for general bearings, chassis points, pins and bushings in construction, mining and industrial equipment, offering high-temperature capability, water resistance and dependable EP protection
Key Performance Features
| Multi-purpose EP performance
lithium-complex EP grease for general bearings, chassis and pins. |
High dropping point
lithium-complex thickener supports high-temperature operation. |
| Mechanical stability
resists softening and leakage under vibration and load. |
Water & corrosion resistance
protects against water washout, rust and corrosion. |
| Wide-temperature use
reliable performance across a broad operating temperature range. |
Versatile application
suitable for a wide range of construction and mining grease points. |
Applications & Performance Level
| Applications | General-purpose bearings, chassis lubrication points, pins and bushings in construction, mining and industrial equipment requiring an NLGI 2 lithium-complex EP grease. |
| Specification | NLGI 2 (Li complex EP) — multi-purpose extreme-pressure grease classification. DIN 51502 KP2N-20 — lithium-complex EP grease designation. ISO 6743-9 L-XBDIB 2 — international grease classification. General OEM bearing grease — suitable for general construction/mining bearing and chassis points. Water-resistant EP — good water washout resistance and EP protection. |
| OEM Suitability | General construction and mining equipment bearings, chassis and pins specifying an NLGI 2 lithium-complex EP grease. Follow the OEM manual. |
| Important Notice | Use only where the equipment manufacturer specifies this grade/type and a matching performance level. ”Suitable for” does not mean official approval unless separately certified. Always follow the OEM manual. |
| Property | Test Method | Target Typical Value |
| Appearance / Texture | Visual | Smooth amber, smooth |
| NLGI Grade | ASTM D217 | 2 |
| Thickener Type | — | Lithium complex |
| Worked Penetration (60x) @ 25°C | ASTM D217 | 265 – 295 (0.1 mm) |
| Dropping Point | ASTM D2265 | ≥ 260°C |
| Base Oil Viscosity @ 40°C | ASTM D445 | 220 mm²/s |
| Operating Temperature Range | — | -20°C to +150°C |
| 4-Ball Weld Load | ASTM D2596 | ≥ 250 kg |
| 4-Ball Wear Scar (1h,40kg) | ASTM D2266 | ≤ 0.5 mm |
| Timken OK Load | ASTM D2509 | ≥ 18 kg |
| Water Washout @ 79°C | ASTM D1264 | ≤ 5 % mass |
| Copper Corrosion | ASTM D4048 | 1a |
Note: The target values above are typical product values for reference only; final production data is subject to the official KATMOTO Technical Data Sheet (TDS) and laboratory test report.
