产品说明
KATMOTO GREASE EP00 / EP0 is a semi-fluid extreme-pressure grease designed for centralised (automatic) lubrication systems on construction and mining equipment. Its low consistency ensures reliable pumpability and flow through central lube lines in cold and warm conditions, while delivering strong EP and anti-wear protection, water resistance and corrosion control at lubrication points.
主要性能特点
| Excellent pumpability
semi-fluid consistency flows reliably through centralised lube systems. |
Cold-weather flow
maintains pumpability in low-temperature operation. |
| 极压保护
protects bearings and joints under heavy and shock load. |
耐水性和耐腐蚀性
protects lubrication points against water and corrosion. |
| 机械稳定性
resists shearing and oil separation in lube lines. |
Central-system suitability
ideal for single-line and dual-line automatic lubrication systems. |
应用和性能水平
| 应用 | Centralised (automatic) lubrication systems supplying bearings, pins and joints on construction and mining equipment where an NLGI 00/0 semi-fluid EP grease is specified. |
| 规格 | NLGI 00 / 0 (semi-fluid EP) — semi-fluid extreme-pressure grease classification for central lube. DIN 51502 GP00/0K-25 — semi-fluid EP grease designation. Central-lube pumpability — formulated for single- and dual-line automatic systems. EP & anti-wear — load-carrying protection at lubrication points. Water-resistant — good water washout resistance. |
| OEM适用性 | Construction and mining equipment with centralised automatic lubrication systems specifying an NLGI 00/0 semi-fluid EP grease. Follow the OEM manual and central-system requirements. |
| 重要通知 | 仅在设备制造商指定此等级/类型及相应性能等级的情况下使用。”适用于”并不意味着已获得官方批准，除非另有认证。请务必遵循原厂（OEM）手册。 |
| 财产 | 测试方法 | 目标典型值 |
| 外观 / 质地 | 目视 | 平滑琥珀色、半流体 |
| NLGI等级 | ASTM D217 | 00 / 0 |
| 增稠剂类型 | — | 锂基/复合锂 |
| 加工穿透（60次）@ 25°C | ASTM D217 | 385 – 430 (0.1 mm) |
| 落点 | ASTM D2265 | ≥ 180°C |
| 基础油在40°C时的粘度 | ASTM D445 | 220 平方毫米/秒 |
| 工作温度范围 | — | -25°C to +120°C |
| 4球焊接载荷 | ASTM D2596 | ≥ 250 公斤 |
| 4球磨损痕迹（1h，40kg） | ASTM D2266 | ≤ 0.5 毫米 |
| 79°C 水洗 | ASTM D1264 | ≤ 8 % mass |
| 铜的腐蚀 | ASTM D4048 | 1a |
注：上述目标值仅为产品的典型值，仅供参考；最终生产数据以KATMOTO官方技术数据表（TDS）和实验室测试报告为准。
