Heavy-Duty Limited Slip Gear Oil
| Nombre del producto | GEAR LS 85W-140 | Especificaciones | SAE 85W-140 |
| Tipo de producto | Aceite para engranajes de deslizamiento limitado | Nivel de rendimiento | API GL-5 / LS |
| Serie / Categoría | EQUIPO | Aplicación | SUV / Pickup / Heavy-Load Differential |
Descripción del producto
KATMOTO GEAR LS 85W-140 is a heavy-duty limited-slip gear oil developed for high-load differentials, hypoid axles, SUVs, pickups, commercial vehicles and off-road equipment requiring SAE 85W-140 API GL-5-type protection. Its high-viscosity film provides excellent shock-load protection, reduced gear wear and reliable performance under hot climate, towing, off-road and severe-duty operation.
Principales prestaciones
| Thick 85W-140 oil film for severe load and hot-climate drivetrains. | API GL-5-type EP protection for hypoid axles and final drives. |
| Limited-slip additive system helps reduce LSD chatter. | High thermal stability for towing, off-road and commercial use. |
| Strong protection against scoring, pitting and shock-load wear. | Suitable for SUVs, pickups, commercial vehicles and heavy-duty axles. |
Aplicaciones y nivel de rendimiento
| Aplicaciones | SUVs, pickups, commercial vehicles, heavy-load rear axles, limited-slip differentials, hypoid final drives, off-road vehicles and agricultural/construction equipment requiring SAE 85W-140 API GL-5 LS oil. |
| Adecuado para | API GL-5 and limited-slip differential service where SAE 85W-140 gear oil is specified. |
| Aviso importante | Not recommended for GL-4-only synchronized manual transmissions, ATF/CVT/DCT systems, or low-viscosity axle applications unless approved by the manufacturer. |
| Propiedad | Método de ensayo | Objetivo Valor típico |
| Aspecto / Color | Visual | Dark Amber |
| Densidad a 15°C | ASTM D4052 | 0,895 g/cm³ |
| Viscosidad cinemática a 40°C | ASTM D445 | 347.0 mm²/s |
| Viscosidad cinemática a 100°C | ASTM D445 | 27.4 mm²/s |
| Índice de viscosidad | ASTM D2270 | 105 |
| Viscosidad de Brookfield a -12 °C | ASTM D2983 | ≤150,000 mPa·s |
| Punto de vertido | ASTM D97 | -18 °C |
| Punto de inflamación, COC | ASTM D92 | 220 °C |
| Corrosión del cobre | ASTM D130 | 1b |
| Etapa de carga de rayado de la FZG | DIN ISO 14635-1 | ≥12 |
