Aceite de limpieza del motor

Descripción del producto

KATMOTO Engine Flush Oil is a fast-acting internal engine cleaner added to the used oil shortly before an oil change. Its concentrated detergent-dispersant system dissolves and suspends sludge, varnish and deposits from oil galleries, rings and the valvetrain, which are then removed with the old oil at drain, restoring engine cleanliness and oil-flow efficiency for the fresh oil fill.

 

Principales prestaciones

Dissolves sludge & varnish powerful detergents loosen and suspend internal deposits and sludge.	Frees sticking rings helps free stuck piston rings and clean the valvetrain.
Restores oil flow cleans oil galleries and the pickup for better fresh-oil circulation.	Fast-acting works in 10–15 minutes of idling before draining the old oil.
Safe for seals compatible with engine seals and gaskets at recommended use.	Gasoline & diesel suitable for gasoline and light-duty diesel engines.

Aplicaciones y nivel de rendimiento

Aplicaciones	Gasoline and light-duty diesel engines, added to the used crankcase oil and idled for 10–15 minutes immediately before draining the old oil and refilling with fresh oil.
Especificaciones	Pre-oil-change flush — internal engine cleaning before an oil change. Detergent-dispersant — dissolves and suspends sludge, varnish and deposits. Seal-safe — compatible with engine seals at recommended dosage. Gasoline & diesel use — suitable for gasoline and light-duty diesel engines. Improves new-oil performance — restores cleanliness for the fresh oil fill.
Idoneidad para fabricantes de equipos originales (OEM)	General gasoline and light-duty diesel engines. Add to warm used oil, idle 10–15 minutes (do not drive), then drain and refill. Do not exceed the recommended idle time.
Aviso importante	For idling use only — do not drive the vehicle with flush in the crankcase. Drain completely and refill with fresh oil. Not for use in engines with known severe mechanical wear.